The March 2017 club meeting got off to a bad start when the demonstrator we were expecting did not turn up. A few phone calls later it emerged that there was a mix-up with dates and confirmation e-mails going missing. In short, our demonstrator was not going to arrive. After some urgent conversations, the committee asked for a volunteer to do an off-the-cuff turning demonstration. Firstly of course we needed another volunteer to go home and pick up some tools.
The whole evening was saved by Mick Smith agreeing to return home and fetch some turning tools and by Wolfgang Schultze-Zachau stepping into the breach and agreeing to do a demonstration.
Thanks to Melvyn Adams for supplying a piece of “wet” beech.
Wolfgang demonstrated a number of techniques as he produced a natural-edged goblet. Through his demonstration, he answered questions from the floor. He also gave tips and advice suitable for both beginners and the more experienced members of the club. Everyone present was very impressed by the way Wolfgang overcame every obstacle, some of which were; the very short notice to do the demo; using someone else’s tools; the chuck being too small for the wood, and then at the most critical moment he discovered the wood was rotten in the middle. However, nothing phased Wolfgang and he cheerfully carried on with the demo, thinking on his feet, and working out solutions to all the problems as he went along.
A genuine master class in wood turning under pressure.
The committee and the club would like to thank Mick and particularly Wolfgang for saving the whole evening for everyone present.
Club members brought in some terrific items this month.